PUVCOD-600 Wholesale Automatic Continous Water Quality Monitoring And Operation Water Quality COD BOD TOC Turbidity Analyzers RS485 Water Quality Sensor Online Digital COD Sensor Probe for Waste Water
Product Description
PUVCOD-600 Wholesale Automatic Continous Water Quality Monitoring And Operation Water Quality COD BOD TOC Turbidity Analyzers RS485 Water Quality Sensor Online Digital COD Sensor Probe for Waste Water
Measurement Principle
Based on the UV absorption reaction by organic matter, the PUVCOD-600 Spectromete Organic On-Line Analyzer uses the 254 nm spectral absorption coefficient SAC254 to measure the content of soluble organic compound in the water, and it can be converted to COD or BOD values under certain conditions. This method allows continuous
monitoring without any reagents.
RS485 Water Quality Sensor Online Digital COD Sensor Probe for Waste Water Features
Direct-immersion probe measurement without taking sampling and
pretreatment;
No chemical reagents, no secondary pollution;
Short response time for continuous measurement
LED light source, small size, low power consumption, easy to integrate on-site
The sensor has an automatic cleaning function to reduce maintenance time.
Sensor power supply positive and negative reverse connection protection
Sensor RS485 A/B terminal is connected to the power supply protection
With time display, data storage and historical data viewing function;
Optional data wireless transmission module.
RS485 Water Quality Sensor Online Digital COD Sensor Probe for Waste Water Application
Continuous monitoring of organic load during sewage treatment, online real-time monitoring of influent and effluent water quality of wastewater treatment plants.
Continuous on-line monitoring of surface water, industrial effluent, and fishery wastewater.
| Model No. | PUVCOD-600 RS485 Water Quality Sensor Online Digital COD Sensor Probe for Waste Water |
| Measuring Range | COD (using KHP calibration) ： 0~1000mg/l COD (5mm),0-100mg/L COD (25mm)BOD (using KHP calibration) ： 0~750mg/L BOD(5mm),0~75mg/L BOD(25mm)TOC(using KHP calibration)：0~400mg/L TOC(5mm),0~40mg/L TOC(25mm) Turbidity：10-800 NTU(5mm),10-300NTU(25mm) |
| Accuracy | COD/BOD/TOC (using KHP calibration)：±5%;Turbidity：±10% |
| Measuring interval | Min one minute |
| Pressure Range | ≤0.1Mpa |
| Sensor material | SUS316L |
| Power Supply | AC:85-500VAC (50/60HZ) DC:9~36VDC |
| Output | 3-way 4-20mA |
| Relay | Setting three-way relays,programmed response parameter and response value. |
| Communication protocol | MODBUS RS485 |
| Storage temperature | -15-50℃ |
| Measuring temperature | 0-45℃ |
| Dimensions | Sensor:Diam 34mm*Length 217mm |
| Weight | Sensor: 0.8KG; |
| Protective rate | Sensor:IP68/NEMA6P; |
| Cable length | Standard:10m,the maximum may be extended to 100m |
| Suggested Backup spare parts | UVCOD Sensor Scraper |