 |
| Quantity: | |
|---|---|
PCH-800
PROBEST
90268090
n Measurement Principle
The principle of PCH-800 Chlorophyll Sensor is using the characteristics of chlorophyll A who has absorption peaks and emission peaks in the spectrum.
n Features
u Based on the Fluorescent measuring target parameter of pigment,can be identified before affected by potential water bloom.
u Without extraction or other treatment, rapid detection to avoid the impact of long shelving the water sample.
u Digital sensor,high anti-jamming capacity and far transmission distance.
u Standard digital signal output,can achieve integration and networking with other equipment without controller.
u Plug-and-play sensors,quick and easy installation.
n Applications
u Chlorophyll online monitoring of water plant inlet,drinking water source and aquaculture and etc.
u Chlorophyll online monitoring of different water bodies,such as surface water,landscape water and seawater and etc.
n Technical Specifications
Measurement range | 0-500 ug/L |
Measurement Accuracy | ±5% of the signal level corresponding value of 1ppb Rhodamine WT Dye |
Pressure range | ≤0.4Mpa |
Calibration | Deviation value calibration,slope Calibration |
Requirements | Suggest a multipoint monitoring for the distribution of Blue-Green Algaein water is very uneven.Water turbidity is below 50NTU. |
Main material | Body：SUS316L（fresh water），Titanium alloy（marine）； Cover：POM；Cable：PUR |
Power supply | AC：85-500VAC (50/60HZ) DC：9~36VDC |
Output | 3-way 4-20mA |
Relay | Three-way relays, programmed response parameter and response value. |
Communication protocol | MODBUS RS485 |
Storage temperature | -15-50℃ |
Measuring temperature | 0- 45℃（Non-freezing） |
Dimension | Sensor：Dia37mm*L 220mm Transmitter：145*125*162mm(L*W*H) |
Weight | Sensor：0.8KG；Transmitter：1.35KG |
Protective rate | Sensor：IP68/NEMA6P；Transmitter：IP65/ NEMA4X |
Cable length | Standard:10m,the maximum may be extended to 100m |
n Measurement Principle
The principle of PCH-800 Chlorophyll Sensor is using the characteristics of chlorophyll A who has absorption peaks and emission peaks in the spectrum.
n Features
u Based on the Fluorescent measuring target parameter of pigment,can be identified before affected by potential water bloom.
u Without extraction or other treatment, rapid detection to avoid the impact of long shelving the water sample.
u Digital sensor,high anti-jamming capacity and far transmission distance.
u Standard digital signal output,can achieve integration and networking with other equipment without controller.
u Plug-and-play sensors,quick and easy installation.
n Applications
u Chlorophyll online monitoring of water plant inlet,drinking water source and aquaculture and etc.
u Chlorophyll online monitoring of different water bodies,such as surface water,landscape water and seawater and etc.
n Technical Specifications
Measurement range | 0-500 ug/L |
Measurement Accuracy | ±5% of the signal level corresponding value of 1ppb Rhodamine WT Dye |
Pressure range | ≤0.4Mpa |
Calibration | Deviation value calibration,slope Calibration |
Requirements | Suggest a multipoint monitoring for the distribution of Blue-Green Algaein water is very uneven.Water turbidity is below 50NTU. |
Main material | Body：SUS316L（fresh water），Titanium alloy（marine）； Cover：POM；Cable：PUR |
Power supply | AC：85-500VAC (50/60HZ) DC：9~36VDC |
Output | 3-way 4-20mA |
Relay | Three-way relays, programmed response parameter and response value. |
Communication protocol | MODBUS RS485 |
Storage temperature | -15-50℃ |
Measuring temperature | 0- 45℃（Non-freezing） |
Dimension | Sensor：Dia37mm*L 220mm Transmitter：145*125*162mm(L*W*H) |
Weight | Sensor：0.8KG；Transmitter：1.35KG |
Protective rate | Sensor：IP68/NEMA6P；Transmitter：IP65/ NEMA4X |
Cable length | Standard:10m,the maximum may be extended to 100m |
