A reliable ISO direct manufacturer, ...... Please contact  probest@probest.cn !

PRODUCTS DETAIL

You are here: Home » Products » Online Analyzer » Optical Water Quality Analyzer » MUC200+PUVCOD-600 Multi-Parameter Classical Competitive Spectrometric Organic Matter Online Analyzer Sludge Concentration Meter COD Tester

SITE SEARCH

PRODUCT CATEGORY

GET IN TOUCH

 Email: zhongweihua@probest.cn 
  Tel: +8613950412146
  Skype: zhongweihua 

loading

Share to:
sharethis sharing button

MUC200+PUVCOD-600 Multi-Parameter Classical Competitive Spectrometric Organic Matter Online Analyzer Sludge Concentration Meter COD Tester

MUC-200 Split Multi-Parameter Online Analyzer Introduction
The multi-parameter transmitter can realize online monitoring of multiple different parameters at the same time through optional sensors according to different needs of customers, including temperature / PH / ORP / conductance / dissolved oxygen / turbidity / sludge concentration / chlorophyll / blue-green algae / UVCOD / UVNO3 / ion ammonia
nitrogen / transparency / residual chlorine and other parameters. The transmitter software interface parameter display realizes self-adaptation,and has data storage and export
This one max could be with 5sensors connected, with 8 parameters
Availability:
Quantity:
  • MUC200+PUVCOD-600

  • PROBEST

Measurement Principle


Based on the UV absorption reaction by organic matter, the PUVCOD-600 Spectromete Organic On-Line Analyzer uses the 254 nm spectral absorption coefficient SAC254 to measure the content of soluble organic compound in the water, and it can be converted to COD or BOD values under certain conditions. This method allows continuous

monitoring without any reagents.


Features

 Direct-immersion probe measurement without taking sampling and pretreatment;

 No chemical reagents, no secondary pollution;

 Short response time for continuous measurement

 LED light source, small size, low power consumption, easy to integrate on-site

 The sensor has an automatic cleaning function to reduce maintenance time.

 Sensor power supply positive and negative reverse connection protection

 Sensor RS485 A/B terminal is connected to the power supply protection

 With time display, data storage and historical data viewing function;

 Optional data wireless transmission module.



Application

Continuous monitoring of organic load during sewage treatment, online real-time monitoring of influent and effluent water quality of wastewater treatment plants.

Continuous on-line monitoring of surface water, industrial effluent, and fishery wastewater.


Model No.UVCOD-900 Spectrometer cod test apparatus machine
Measuring Range

COD (KHP was used for calibration):0~500mg/L (5mm);

BOD (KHP was used for calibration):0~375mg/L (5mm);

Suspended solids:0~500mg/L(Tetst the trend))

AccuracyCOD/BOD/TOC (using KHP calibration):±5%; SS: Trend
Measuring intervalMin one minute
Pressure Range≤0.1Mpa
Sensor materialSUS316L
Power SupplyAC:85-500VAC (50/60HZ)  DC:9~36VDC
Output3-way 4-20mA
RelaySetting three-way relays,programmed response parameter and response value.
Communication protocolMODBUS  RS485
Storage temperature-15-50℃
Measuring temperature0-45℃
DimensionsSensor:Diam 34mm*Length 217mm 
WeightSensor: 0.8KG;
Protective rateSensor:IP68/NEMA6P;
Cable lengthStandard:10m,the maximum may be extended to 100m
Suggested Backup spare parts UVCOD Sensor Scraper

Technical Specifications

Display: 7 inch touch screen with LED strong backlight, can operate in direct sunlight

Power supply: AC power supply: 85-500VAC or DC Power:9-36VDC

Output: Standard 8 channels 4-20mA analog output. Program setting response

parameters and response values

Relay Four-way relay, program setting response parameters and response values

Communication protocol

Standard: MODBUS RS485 communication for real-time transmission of measured value. Optional wireless communication method : 4G: UDP/TCP  NB: UDP

Main Material: PA66+GF25+FR (top cover); aluminum powder dusting (lower shell)

Storage Temperature: -20 to 70℃

Operation temperature: -15 to 60℃

Protective rate: IP65/ NEMA4X

Dimension" 260mm*200mm*123.3mm (L*W*H)

Weight About: 2.0KG

Standard Electrode Parameters: 

Temperature: Principle Thermistor method

Range 0℃-80℃

Accuracy ±0.5℃

pH Sensor

Principle Glass electrode method

Range 0-14 pH

Accuracy ±0.1 pH

Dimension 28.7mm*195mm(Φ*L)

TDS Sensor

Principle Conductivity cell method

Range 0-2500 mg/L(K=1)

Accuracy ±3% or 3 us/cm, whichever is greater

Dimension 28.7mm*195mm(Φ*L)

UVCOD Sensor

Principle Spectroscopy

Range

COD (KHP was used for calibration):0~500mg/L (5mm);

BOD (KHP was used for calibration):0~375mg/L (5mm);

Suspended solids:0~500mg/L(Tetst the trend))

Accuracy COD/BOD:±5% (KHP standard solution)

Dimension 34*217mm(Diam*L)


Previous: 
Next: 
Product Inquiry

Random Products

QUICK LINKS

PRODUCT CATEGORY

INDUSTRY APPLICATIONS

CONTACT US

Tel:+86-13950412146
Email:
probest@probest.cn
Skype: zhongweihua
WhatsApp:  +86-13950412146 (WeChat)

 
Address:No.170, Jinyan Road, Jianshan Investment Zone, Fuzhou,Fujian, China
 
Probest: Focus on the progress and commercialization in sensing technology! 
Focus on sensing technology & water analyzer instruments since 2013!

 
Copyright ©2015 Fuzhou Probest Intelligent Technology Co., Ltd. All Rights Reserved
Leave a Message
Contact Us