PPH-500A Digital pH sensor
Measurement Principle
The pH sensor uses a composite electrode in which a glass indicating electrode and a reference electrode are combined to measure the pH of the water.
Features
Power supply and output isolation design to ensure electrical safety.
Power supply and communication chip built-in protection circuit, strong anti-interference ability.
With a comprehensive protection circuit design, it can work reliably without additional equipment.
The circuit part is designed inside the electrode, the environment is well tolerated, and the installation operation is easier.
RS-485 transmission interface, MODBUS-RTU communication protocol, two-way communication, can receive remote commands.
Output more electrode diagnostic information, more intelligent.
Internal integrated memory, memory calibration and setting information can be memorized.
Quantity: | |
---|---|
n Applications
u It is widely used in pH monitoring in water treatment, hydrological monitoring, wastewater treatment, swimming pools, fish ponds and fertilizers, chemicals, and biology.
n Technical Specifications
Sensor Main material | Black Polypropylene,Ag/Agcl Reference Gel |
Measurement range | 0-14pH |
Resolution | 0.01 pH |
Precision | ±0.1 pH |
Repeatability | ±0.1 pH |
Temperature compensation | 0-60℃ |
Temperature resolution | 0.1℃ |
Temperature precision | 0.5℃ |
Pressure range | 0-0.1Mpa |
Applicable Temperature | 0~60℃(Non-freezing) |
Power supply | 12V DC |
Dimension | Dia. 26mm*Length166mm |
Water Protective rate | Sensor:IP68/NEMA6P |
Cable length | Standard: 10 m, the maximum can be extended to 200M |