A reliable ISO direct manufacturer.                                                                                                         Please contact  info@probesti.com

PRODUCTS DETAIL

You are here: Home » Products » Online Analyzer » Optical Water Quality Analyzer » PUVCOD-600 Spectrometer Organic UVCOD COD TOC BOD Turbidity Water OnLine Sensor Analyzer

SITE SEARCH

PRODUCT CATEGORY

GET IN TOUCH

 Email: 
info@probesti.com
zhongweihua@probest.cn 
  Tel: +8613950412146
  Skype: zhongweihua 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

PUVCOD-600 Spectrometer Organic UVCOD COD TOC BOD Turbidity Water OnLine Sensor Analyzer

COD and BOD can be indicated as mg/L or ppm (parts per million).
Both parameters measure the amount of oxygen needed to oxidize pollutants in water.
Also, both measurements indicate the intensity of water pollution.
Almost all wastewater treatment plants are required to measure one of these three items as a measure of the pollution value in the water. COD should always measure higher than TOC and then BOD.
Availability:
Quantity:
  • PUVCOD-600

  • PROBEST

Measurement Principle



Based on the UV absorption reaction by organic matter, the PUVCOD-

600 Spectromete Organic On-Line Analyzer uses the 254 nm spectral

absorption coefficient SAC254 to measure the content of soluble

organic compound in the water, and it can be converted to COD or

BOD values under certain conditions. This method allows continuous

monitoring without any reagents.


Features

 Direct-immersion probe measurement without taking sampling and

pretreatment;

 No chemical reagents, no secondary pollution;

 Short response time for continuous measurement

 LED light source, small size, low power consumption, easy to integrate on-site

 The sensor has an automatic cleaning function to reduce maintenance time.

 Sensor power supply positive and negative reverse connection protection

 Sensor RS485 A/B terminal is connected to the power supply protection

 With time display, data storage and historical data viewing function;

 Optional data wireless transmission module.



Application

Continuous monitoring of organic load during sewage treatment, online real-time monitoring of influent and effluent water quality of wastewater treatment plants.

Continuous on-line monitoring of surface water, industrial effluent, and fishery wastewater.


Model No.UVCOD-900 Spectrometer cod test apparatus machine
Measuring Range

COD (using KHP calibration):0~500mg/l COD ;BOD (using KHP

calibration):0~375mg/L BOD;TOC(using KHP calibration):0~200mg/L TOC

Turbidity:10-800 NTU

AccuracyCOD/BOD/TOC (using KHP calibration):±5%;Turbidity:±10%
Measuring intervalMin one minute
Pressure Range≤0.1Mpa
Sensor materialSUS316L
Power SupplyAC:85-500VAC (50/60HZ)  DC:9~36VDC
Output3-way 4-20mA
RelaySetting three-way relays,programmed response parameter and response value.
Communication protocolMODBUS  RS485
Storage temperature-15-50℃
Measuring temperature0-45℃
DimensionsSensor:Diam 34mm*Length 217mm 
WeightSensor: 0.8KG;
Protective rateSensor:IP68/NEMA6P;
Cable lengthStandard:10m,the maximum may be extended to 100m
Suggested Backup spare parts UVCOD Sensor Scraper


Previous: 
Next: